Printers Manuals

Resetting waste ink for canon 2200

1. Unzip downloaded file.
2. Run GeneralTool.exe
3. Select the connected USB port number from USB port
4. Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
5. In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the platen waste ink counter.
   If both the main and platen waste ink absorbers are replaced, reset both the main and platen waste ink counters.

http://www.savefile.com/files/1016479

Resetting waste ink for canon 1600

1. Unzip downloaded file.
2. Run GeneralTool.exe
3. Select the connected USB port number from USB port
4. Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
5. In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the platen waste ink counter.
   If both the main and platen waste ink absorbers are replaced, reset both the main and platen waste ink counters.

http://www.savefile.com/files/1016479

Waste Ink Canon i320

Step 1
Manual Temporary

1. Unplug power and USBOpen door and hold power buttonConnect power
2. Close door, then release power button.

or Step

1. Turn off the printer. And disconnect the printer cable
2. Press and hold the POWER button, turn on the printer
3. The indicator (L.E.D.) should be green
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green
6. Release both buttons.

Step 2 Software for Permanant

1. Reconnect the printer cable.
2. Open General Tools software and select (USB PORT)
3. Choose (SET DESTINATION 1) And it should be reset.

Remark “After service mode Pls use software

download here resetter printer Canon IP 1500.
This tool can reset waste ink for canon ip1500 permanent

1. Unzip downloaded file.
2. Run GeneralTool.exe
3. Select the connected USB port number from USB port
4. Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
5. In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the platen waste ink counter.

If both the main and platen waste ink absorbers are replaced, reset both the main and platen waste ink counters.

http://www.savefile.com/files/1039880

This manual could include technical inaccuracies or typographical errors due to improvements or changes made to the product. When changes are made to the contents of the manual, Canon will release technical information when necessary. When substantial changes are made to the contents of the manual, Canon will issue a revised edition.

download here http://www.rapidshare.com/file/1013586

Unplug power and USBOpen door and hold power buttonConnect power

1. Close door, then release power button.

Turn off the printer. And disconnect the printer cable

1. Press and hold the POWER button, turn on the printer
2. The indicator (L.E.D.) should be green
3. Press and release the RESUME button , the indicator (L.E.D.) should be orange
4. Press and release the RESUME button again, the indicator (L.E.D.) should be green
5. Release both buttons.

Step 2 Software for Permanant

1. Reconnect the printer cable.
2. Open General Tools software and select (USB PORT)
3. Choose (SET DESTINATION 1) And it should be reset.