2008 | Printers Manuals

Wednesday, July 23, 2008

Manual Service for i850, i950, S600 Canon printer

Start with the printer OFF

1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing Select function with RESUME press POWER to execute: presses - light color - function

Number of presses - light color
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter

Tuesday, July 15, 2008

700/750C/750C PLUS/755CM Hp Designjet Plotters

This service manual contains information necessary to test, calibrate and service:

HP Designjet 700 plotters (models C4705A and C4706A)
HP Designjet 750C plotters (models C3195A and C3196A)
HP Designjet 750C Plus plotters (models C4708A and C4709A)
HP Designjet 755CM printers (models C3198A and C3198B)

For information about these plotters/printers, refer to the corresponding user and quick-reference guide

Table of contents HP Designjet 700/750C/750C PLUS/755CM Printer Service And Repair Manual

Product Information
Site Planning and Requirements
Installation and Configuration
Preventive Maintenance
Functional Overview
Removal and Replacement
Calibrations and Adjustments
Troubleshooting
Print Quality
Product History and Service Notes
Parts and Diagrams
Support Services

http://rapidshare.com/files/108116030/HP_DESIGNJET_700__750C__750CT__755CM_Service_Manual.rar

Monday, July 14, 2008

Reset Waste Ink Canon IP1500

Step 1 Manual for Service mode to reset waste ink or blinking canon ip1500

Unplug power and USB.
Open door and hold power button.
Connect power.
Close door, then release power button.

Step 2 Use software for Permanent to reset waste ink
download tool to reset permanent waste ink.
this resetter printer Canon IP 1500. This tool can reset waste ink for canon ip1500 permanent

User guide:

Unzip downloaded file.
Run GeneralTool.exe
Select the connected USB port number from USB port
Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the platen waste ink counter.

If both the main and platen waste ink absorbers are replaced, reset both the main and platen waste ink counters.

http://www.savefile.com/files/1039880
http://resettercanon.blogspot.com

Wednesday, July 2, 2008

Canon i250,i255,i320,i350,i355,pixma ip1000/1500

Canon i250,i255,i320,i350,i355,pixma ip1000/1500
Canon GENERIC "S" SERIES
Canon i850, i950, S600
Canon S450 Printer
Canon BJC-2000 BJC-2100 Series
Canon BJC-210 BJC-240 BJC-250 BJC-255 BJC-265
Canon BJC-4100 BJC-4200 BJC-4300 BJC-4400 BJC-4550 BJC-4650
Canon BJC-5000
Canon BJC-3000 BJC-6000 BJC-6100 BJC-6200 S400 S450 F300 F600 F620
Canon BJC-7000 BJC-7100 BJC-8000 BJ-F800 i6500
Canon BJC-600 BJC-600e BJC-610 BJC-620
Canon BJC-50 BJC-55 BJC-80 BJC-85 M40 M70
Canon BJ-30 BJC-35v BJC-70 F14 Error Reset
Canon BJ F900, F890, F700, F500, S900, S820, S750 and S520
Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above
Canon S900, S820, S750, S520
Canon S9000
Canon MPC190

Tuesday, July 1, 2008

download installer epson stylus c58, free resetter epson stylus c87

adjustment program ... for epson c58, c79, c87, c67, cx 2800, cx 4900,
cx5900, r270,
free epson c87 plus resetter software, resetting programme for
epson cx 2800,
reset epson stylus c87, jual printer epson stylus c79,
download installer epson stylus c58, free resetter epson stylus c87
plus, free adjustment program
http://epsonresetter-blogspot.com

Monday, June 2, 2008

Canon iP1200,Canon iP1300,Canon iP1600,Canon iP1700, Canon iP1800, Canon iP2200, iP2500. iP1200, iP1300, iP1600, iP1700, Canon iP1800, Canon iP2200,

Canon iPTool designed for Clear counter & wast ink reset with the printer Canon iP-series in Normal mode at the moment are supported :Canon iP1200,Canon iP1300,Canon iP1600,Canon iP1700, Canon iP1800, Canon iP2200, iP2500. iP1200, iP1300, iP1600, iP1700, Canon iP1800, Canon iP2200, Canon iP2500.

Canon iPTool Features:
Expanded information on the printer ink in the cartridge level, and containers for the waste of ink.
Printing test samples for testing nozzles PG.
Cleaning and deep cleaning PG printer pallet cleansing and cleaning rollers.
Changing the delay value for drying.
Changing your printer.
Reading and dumping EEPROM printer.
Obnulenie counters level black and coloured ink cartridges.

Sunday, June 1, 2008

Canon Reseter ip2200 ip1300+ip1700+350i+i355 i350+i255+i250+iP1500+iP1000

Download canon reseter all type * Canon Reseter ip1300 Canon Reseter ip1700 Canon Reseterpixus350i Canon Reseter i355 Canon Reseter i350 Canon Reseter i255 Canon Reseter i250 Canon Reseter iP1500 Canon Reseter iP1000 Canon Reseter ip1200 Canon Reseter ip1600 Canon Reseter ip2200 ip1300+ip1700+350i+i355 i350+i255+i250+iP1500+iP1000,cara yang mudah dan pasti mujarap untuk mengatasi "the waste ink absorse is full" atau mereset printer canon yang ngeblank, kedip2.

Printer canon memiliki penampung tinta bekas yang suatu waktu pasti akan penuh. dan ketika dinyatakan penuh, printer akan ngeblank alias tidak bisa dipakai.
untuk mengatasinya, printer harus direseset. untuk meresetnya di tukang service printer biaya yang dikenakan cukup mahal, kalo tidak percaya tanya aja.

download di tempat yang ga jelas,malah buat kita jengkel selain buang-buang waktu, bayar biaya warnet,eh hasilnya tidak memuaskan. printerpun tetap nge-blank.yah mungkin berhasil, tapi setelah dipakai beberapa hari sudah ngeblank lagi.

DOWNLOADS CANON RESETER HERE

Download canon reseter all type

Download canon reseter all type
* Canon Reseter ip1300
Canon Reseter ip1700
Canon Reseterpixus350i
Canon Reseter i355
Canon Reseter i350
Canon Reseter i255
Canon Reseter i250
Canon Reseter iP1500
Canon Reseter iP1000
Canon Reseter ip1200
Canon Reseter ip1600
Canon Reseter ip2200 ip1300+ip1700+350i+i355 i350+i255+i250+iP1500+iP1000,
cara yang mudah dan pasti mujarap untuk mengatasi "the waste ink absorse is full" atau mereset printer canon yang ngeblank, kedip2.

Printer canon memiliki penampung tinta bekas yang suatu waktu pasti akan penuh. dan ketika dinyatakan penuh, printer akan ngeblank alias tidak bisa dipakai.
untuk mengatasinya, printer harus direseset. untuk meresetnya di tukang service printer biaya yang dikenakan cukup mahal, kalo tidak percaya tanya aja.

download di tempat yang ga jelas,malah buat kita jengkel selain buang-buang waktu, bayar biaya warnet,eh hasilnya tidak memuaskan. printerpun tetap nge-blank.yah mungkin berhasil, tapi setelah dipakai beberapa hari sudah ngeblank lagi.

DOWNLOADS CANON RESETER HERE

Canon Reseter ip1300

Info resetter link

Memiliki Printer Pixma ini mungkin banyak diantara kita yang merasa kecewa karena telah membelinya, Benar... printer ini pengoprasiannya dibatasi hingga batas tertentu, Sehingga jika sudah mencapai batas yang telah diakumulasikan ini printer akan berhenti mencetak dengan kata lainnya BLINGKING dan mau tidak mau anda harus membawanya ke Service Center untuk memperbaikinya!

Bayangkan... di saat anda sangat membutuhkan mesin pencetak bisa berjalan dengan baik, printer anda ngadat, terjadi BLINK! Itu masih beruntung karena masih bisa diservice mode, lebih celakanya lagi... printer terus saja nge-BLINKING setiap mau dipakai. Semua data hasil jerih payah anda sia-sia karena tidak bisa dicetak hari ini juga.

looking more resetter :

http://canon-resetter.blogspot.com

http://epsonresetter.blogspot.com

http://pratama.auli.biz

http://printer-resetter.blogspot.com

Saturday, May 31, 2008

free collection resetter canon

i255_355 Service tool Reseter i255 untuk Win 98
i320 Service tool Reseter i255 Untuk win 98, me, XP
iP1000 Service tool Reseter iP1000 Untuk win 98, me, XP
iP1100, 1800, 2500 Reseter untuk iP1100, iP 1800,iP 2500
iP1600 Service tool Reseter iP1200 Untuk win 98, me, XP
iP1500 Service tool Reseter iP1500 Untuk win 98, me, XP
iP1200_1600_2200 Service tool Reseter iP1200, 1600, 2200, win 98, me, XP
iP1300_1700 Service tool Reseter iP1300, 1700 Untuk win 98, me, XP
Canon Reseter ip1600 Reseter iP1600
Canon Reseter ip2200 Reseter iP2200
Petunjuk mereset printer Canon untuk beberapa type

MP Tool v0.9.2

MP Tool v0.9.2

MP Tool versi 0.9.2 adalah software resetter untuk printer Canon type MPxx.
Adapun type yang dapat direset oleh sofware ini adalah :
MP150, MP160, MP170, MP180, MP450, dan MP460

Berbeda dengan sofware resetter lainnya, sofware ini penggunaan sangat mudah.
Silahkan anda download dari situs resminya, yaitu:
http://www.ipt.nm.ru

Mungkin anda kesulitan, karena situs ini berbahasa Rusia. Tapi jangan kuatir, anda juga bisa download di sini:
http://www.box.net/shared/4yblbn34kg

Service Manual Epson Stylus Photo R200-R210

Service Manual Epson Stylus Photo R200-R210

Troubleshooting.
Disassembly and Assembly.
Adjusments.
Maintenance.
Appendix.

DOWNLOAD Epson Stylus Photo R200-R210

Resetting Epson Stylus C58

Found another great sharing of printer resetter here you can found alot of Epson driver at divshare here
Here the screenshot :

You can also reset and fix yor Epson R270, R240, R250, R220, RX700, RX600, RX3700, RX3800, CX1500, CX2800, C63, C79, CX3900, C59, C45, CX4100, R1800, CX5900, C90.

This Epson C58 most of them are modifing because the refill ink are often makes trouble. Download here

Here some tips if you still get error after changing the date:
1. delete folder ;C:\Adjustment Program\Stylus C58
2. delete registry HKEY_LOCAL_MACHINE\SOFTWARE\EPSON\PTSG\Stylus C58
delete the folder registry not just the key
3. Don't forget to set the date into 9 Nop 06 before running the program

Canon Pixma ip1000

Here's some tips for your Canon Pixma IP1000. I have two IP1000 printer, one is broken because the head need to be replaced, but the other is still powerful. I like this printer because the simple operational
the low budget, the one that I like most is the fast printing.
The problem that I have when using this printer is when the ink waste absorber is full, and he start to blink. Ok guys, Here's some tips for you who still use this printer.

How to physically change the ink waste absorber? Pixma ip1000
The waste ink absorbers can be found at the bottom of the printer case.
Normally you'll have to open the printer case, loose the screws of the print unit and remove the hole print unit from the lower part of the printer case.

4 step to Reset waste ink tank counter CANON PIXMA iP 1000
STEP 1:- Disconnect printer from AC power
STEP 2:- Press and HOLD the POWER button, and connect printer to AC power
STEP 3:- release the the POWER button
STEP 4:- Press the POWER button again

If your IP1000 Blinking try this Tips :
Step 1: Manual for Service mode
1. Unplug POWER and USB cables.
2. Open door, PRESS and HOLD the POWER button.
3. Connect the POWER cable.
4. Close door, then release POWER button.
5. Power ON your printer a usual (It should not blinking anymore)

Step 2 : Software for Permanant
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1500", Downloadh The Software here
3. Select (USB PORT)
4. Choose CLEAR WASTE INK COUNTER - MAIN
5. Choose CLEAR WASTE INK COUNTER - PLATEN
It should be working, coz my printer now work normally

Friday, May 30, 2008

EPSON Stylus Color

EPSON Stylus Color

Pressing and holding ALT+FONT+LOAD+PAUSE buttons combination, press POWER button.
Release all buttons.

EPSON Stylus Color 300

Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons

In 2-3 seconds time press LOAD/EJECT and CLEANING buttons again.

EPSON Stylus Color 400, 600

Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and release LOAD/EJECT button.

EPSON Stylus Color 440, 640, 740, 460, 660, 670, 760, 860, 880, 1160

Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and hold CLEANING button, until all leds will blink.

EPSON Stylus Color 680

Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and hold LOAD/EJECT button, until all leds will blink.

EPSON Stylus Color 800, 850

Pressing and holding LOAD, CLEANING Color and CLEANING Black buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and release CLEANING Color button, You will see leds blinking.

EPSON Stylus Color 900, 980

Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button, You will see blinking INK OUT led.
Release all buttons.
In 2-3 seconds time press and hold CLEANING button for 10-12 seconds.

EPSON Stylus Color 3000

Pressing and holding PAUSE, LF/FF and DOWN ARROW buttons turn on printer.
Release all buttons.

EPSON Stylus Photo 785, 895

Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Error led.
Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.

EPSON Stylus Photo 890, 1280, 1290

Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Power led.
Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.
In 2-3 seconds time press LOAD/EJECT and CLEANING buttons again.

EPSON Stylus Color 400, 600

Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and release LOAD/EJECT button.

EPSON Stylus Color 440, 640, 740, 460, 660, 670, 760, 860, 880, 1160

Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and hold CLEANING button, until all leds will blink.

EPSON Stylus Color 680

Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and hold LOAD/EJECT button, until all leds will blink.

EPSON Stylus Color 800, 850

Pressing and holding LOAD, CLEANING Color and CLEANING Black buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and release CLEANING Color button, You will see leds blinking.

EPSON Stylus Color 900, 980

Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button, You will see blinking INK OUT led.
Release all buttons.
In 2-3 seconds time press and hold CLEANING button for 10-12 seconds.

EPSON Stylus Color 3000

Pressing and holding PAUSE, LF/FF and DOWN ARROW buttons turn on printer.
Release all buttons.

EPSON Stylus Photo 785, 895

Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Error led.
Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.

EPSON Stylus Photo 890, 1280, 1290

Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Power led.
Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.

Thursday, May 29, 2008

The waste-ink counter for the BJ F900, F890, F700, F500, S900, S820, S750 and S520

The waste-ink counter for the BJ F900, F890, F700, F500, S900, S820, S750 and S520 are all reset in the same manner.

Turn off the printer.

Press and hold the RESUME button, then press and hold the POWER button.

Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily.

You are now in Service mode.

Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.

1. service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)

After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.

If you have a defective printer head, your power lamp may flash during the service mode key-in, and info printouts may not work. In this case, clearing the waste-ink counter may not fix your problem.

Wednesday, May 28, 2008

EPSON C67

actually i,m also using C67, C68 and C87 epson printer with CISS or continuous ink supply system but unfortunately this practice waste me a lot of ink just by doing printhead clean-up.
this technology is not really worth buying for.

this because if can can just figure out how this printer feed ink by original cartridges you can see easily the problem brought by this CISS.

Basically the main problem is the pressure difference between the tank and the ink delivery cartridges with the built-in auto reset chips, this, even just simple pressure calculations you can actually derive a negative pressure pulling the ink towards the tank,
every after printing (if you can notice) you have to do the routine head clean-up and therefore wasting a lot of ink. base from experience it would be much better if you just refill the original cartridge and transfer the auto reset chips to the genuine cartridges.

so by doing this you can save the life of your printerhead, ink pad etc. also the original cartridge contain a sponge which also aid in filtering the refilled ink unlike the ciss cartridge that has none.

Tuesday, May 27, 2008

reset tipe i320, i255, i1000, i1200, i1600, i1700, i2200 i880.

Cuma pengen berbagi pengalaman nih, saya udah lama make printer canon mulai dari type yang i320, i255, i1000, i1200, i1600, i1700, i2200 sekarang i880. diantara semua type itu yang paling awet mudah resetnya itu yang i320, 255 n i1000. kalo udah blink pertama reset manual dulu:
1. matiin power (cabut kabel)
2. tekan resume
3. colok power (masih tekan resume), trus lepas resumenya
4. trus tekan resume 4 kali (bakal kelihatan lampu -orange-hijau-orange-hijau)
5. lepas resume
6. turn off power then turn on
abis itu baru di reset pake softwarenya. nah kalo utk yang seri i200, i1300, i1600, i1700, i2200, cara reset manualnya agak beda dikit yaitu pada langkah ke empat cuma di tekan 2 kali saja, tapi kadang ada printer dr type ini yang tidak bisa di reset manual. jadi selama pengalaman saya ada yang bisa di reset manual ada yang tidak. jadi cara saya utk ngatasi sering-sering di cek pake software reseternya (general tools) utk lihat jumlah printingnya udah berapa halaman, jadi sebelum blinking ya direset software dulu. utk software resetenya yang saya punya ada utk i320, i1000, i1200,ip13000,ip15000,i1600, i1300,i1700, i2000,i2200, ip1880,1100,2500 semuanya ada di blog ini coba aja deh GRATIS , semoga bermanfaat.
http://printer-resetter.blogspot.com

Wednesday, April 2, 2008

Service Manual s900/820/750/520

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and repair of products. This manual covers all localities where the products are sold. For this reason, there may be information in this manual that does not apply to your locality.

This manual could include technical inaccuracies or typographical errors due to improvements or changes in the products. When changes occur in applicable products or in the content of this manual,
Canon will release technical information as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new edition of this manual.
The product names and company names described in this manual are the registered trademarks of the individual companies.
This manual consists of four parts containing information for servicing the product.

Product Specifications
Troubleshooting
Technical Reference
Appendix

http://www.savefile.com/files/1055398

Subscribe to: Posts (Atom)