Printer resetter,service manual,epson resetter,chip canon resetter, software free download,driver
Sunday, December 1, 2013
Epson Stylus Photo TX650 Resetter
a. Epson Stylus Photo Printer Drivers TX650 is installed first, and make sure the printer is connect to the computer
b. Make sure you have the "Software Resetter Printer Epson Stylus Photo TX650"
c. Make sure that the damages requested in the printer reset counter (usually a red flame of the lamp on the printer all)
Here is a tutorial resetter Epson Stylus Photo TX650:
One. Prepare Adjustment Epson Stylus Photo Software TX650 on your computer
2. If the software is compressed, first extract the software resetter Epson Stylus Photo TX650
3. Turn on the Printer
4. Open the folder resetter Epson Stylus Photo TX650 Adjprog.exe you and run the file.
5. Click Particular adjustment mode menu entry to reset the counter printeradjustment Epson tx650
6. Find and click on Waste ink pad counter menu, then click OK
7. Put a Check on main pad counters, Platen pad counters, and counters of 80 culmu Pad. Then click on Check to see third-counter value at the time of blinking, and click OK to continue
Click initialization to change / reset the printer counter becomes zero, so the printer to be normal again. Then click OK to continue
8. Click Finish to end the process of resetting counters TX650 Epson Stylus Photo
9. Click Previous to return to main menu
10. Click Quit to exit the program counter reset TX650 Epson Stylus Photo
11. Waste ink counter reset TX650 Epson Stylus Photove done, turn off the printer for a while, and then restart the printer, and wait until the printer calibration is completed
Related Posts : epson,
photo,
resetter,
stylus,
tx650