Printers Manuals

The waste-ink counter for the BJ F900, F890, F700, F500, S900, S820, S750 and S520 are all reset in the same manner.

Turn off the printer.

Press and hold the RESUME button, then press and hold the POWER button.

Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily.

You are now in Service mode.

Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.

1. service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)

After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.

If you have a defective printer head, your power lamp may flash during the service mode key-in, and info printouts may not work. In this case, clearing the waste-ink counter may not fix your problem.

actually i,m also using C67, C68 and C87 epson printer with CISS or continuous ink supply system but unfortunately this practice waste me a lot of ink just by doing printhead clean-up.
this technology is not really worth buying for.

this because if can can just figure out how this printer feed ink by original cartridges you can see easily the problem brought by this CISS.

Basically the main problem is the pressure difference between the tank and the ink delivery cartridges with the built-in auto reset chips, this, even just simple pressure calculations you can actually derive a negative pressure pulling the ink towards the tank,
every after printing (if you can notice) you have to do the routine head clean-up and therefore wasting a lot of ink. base from experience it would be much better if you just refill the original cartridge and transfer the auto reset chips to the genuine cartridges.

so by doing this you can save the life of your printerhead, ink pad etc. also the original cartridge contain a sponge which also aid in filtering the refilled ink unlike the ciss cartridge that has none.

Cuma pengen berbagi pengalaman nih, saya udah lama make printer canon mulai dari type yang i320, i255, i1000, i1200, i1600, i1700, i2200 sekarang i880. diantara semua type itu yang paling awet mudah resetnya itu yang i320, 255 n i1000. kalo udah blink pertama reset manual dulu:
1. matiin power (cabut kabel)
2. tekan resume
3. colok power (masih tekan resume), trus lepas resumenya
4. trus tekan resume 4 kali (bakal kelihatan lampu -orange-hijau-orange-hijau)
5. lepas resume
6. turn off power then turn on
abis itu baru di reset pake softwarenya. nah kalo utk yang seri i200, i1300, i1600, i1700, i2200, cara reset manualnya agak beda dikit yaitu pada langkah ke empat cuma di tekan 2 kali saja, tapi kadang ada printer dr type ini yang tidak bisa di reset manual. jadi selama pengalaman saya ada yang bisa di reset manual ada yang tidak. jadi cara saya utk ngatasi sering-sering di cek pake software reseternya (general tools) utk lihat jumlah printingnya udah berapa halaman, jadi sebelum blinking ya direset software dulu. utk software resetenya yang saya punya ada utk i320, i1000, i1200,ip13000,ip15000,i1600, i1300,i1700, i2000,i2200, ip1880,1100,2500 semuanya ada di blog ini coba aja deh GRATIS , semoga bermanfaat.
http://printer-resetter.blogspot.com

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and repair of products. This manual covers all localities where the products are sold. For this reason, there may be information in this manual that does not apply to your locality.