Showing posts with label code. Show all posts
Showing posts with label code. Show all posts
Monday, November 25, 2013
How To fix Canon LBP2900 Error Code E100 0000
Canon LBP2900 E#100, ERR 100 or E100-0000: thats a laser scanner unit error.
Procedure 1:
Turn off the printer, wait 10 minutes, and then turn it on again.
Procedure 2:
Flip open the top of the printer.
Look for a small shutter that holds the laser: carefully force this open with your hands and force the laser out into the center of the tracking cradle.
After you move the laser, unplug the printer for a few minutes.
Plug the printer back in.
Monday, March 18, 2013
Canon BJC 210 BJC 240 BJC 250 BJC 255 BJC 265 Secret Resetter Code
1. Unplug Power Cord
2. Hold POWER and RESUME buttons
3. Plug in Power Cord
4. Release buttons
5. Open front door of printer
6. Hold the CARTRIDGE and RESUME buttons
7. Press POWER
8. Release all buttons after the beeps
9. Press CARTRIDGE once
10. Press RESUME
The Secret Resetter Code for Canon BJC-5000
1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
5. Press Power to set data
Service Test Print
1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME 2 times. The indicator should be GREEN.
5. Press Power to Print
Nozzle Print
1. Power off printer
2. Press and POWER, until the printer beeps and release.
Demonstration Print
* While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.
The Secret Resetter Code for Canon BJC-5100
Self Test
* Switch Printer off. Hold Power for 1 beep.
Waste Counter Reset
1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME 4 times. The indicator should be GREEN.
5. Press Power to set data
Service Test Print
1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME 2 times. The indicator should be GREEN.
5. Press Power to Print
Nozzle Print
1. Power off printer
2. Press and POWER, until the printer beeps and release.
Demonstration Print
* While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.
Subscribe to:
Posts (Atom)