Showing posts with label fix. Show all posts
Showing posts with label fix. Show all posts
Tuesday, November 26, 2013
How To fix Error 60 02 on HP Laserjet 4250 series
It appears that the spring which holds the lifter motor upright was designed without enough tension on it.
If the spring is removed and the motor assembly is allowed to fall to the right when the paper tray is inserted the motor never engages the tray and an error 60.02 appears.
However if the motor assembly is held upright while the tray is inserted the error message never appears as the motor always engages.
Monday, November 25, 2013
How To fix Canon LBP2900 Error Code E100 0000
Canon LBP2900 E#100, ERR 100 or E100-0000: thats a laser scanner unit error.
Procedure 1:
Turn off the printer, wait 10 minutes, and then turn it on again.
Procedure 2:
Flip open the top of the printer.
Look for a small shutter that holds the laser: carefully force this open with your hands and force the laser out into the center of the tracking cradle.
After you move the laser, unplug the printer for a few minutes.
Plug the printer back in.
Sunday, November 24, 2013
How To fix HP Laserjet 49 errors
The HP laserjet 49 errors are a firmware error, it might be caused by the firmware itself, or by the failure of a printer module.
How to isolate the cause:
Verify that the problem is not being caused by a specific job, this error can be caused by bad information being sent to the printer.
Power off and remove any installed EIO devices, (JetDirect Cards, Hard Drives), power on and test.
Cold Reset the printer:
Power off, remove any optional memory, power on and retest.
Power off and reseat any memory and firmware modules on the formatter board, power on and test.
Power off, reseat the formatter board, power on and test.
Check firmware version:
On newer machines with flashable firmware upgrade to the latest version. If you are running the latest version reload it, this might fix corrupted firmware. (Some printers have flashable firmware, others use a Firmware DIMM which must be replaced to upgrade.)
If you havent found the cause yet, it could be:
The firmware module if its a DIMM as opposed to being part of the formatter.
The memory if installed, some printers have to have at least one memory module installed to run, and it must have enough capacity to function, in some cases installing a module that does not meet the minimum requirements of the machine will cause a 49 error
Wednesday, November 20, 2013
How to fix USB001 Operator error on hp epson canon brother printers
Solutions for "USB001 Operator error":
Procedure 1:
Disconnect the USB cable and the power cable from the printer.
Power off the printer and the central unit.
Wait a minute.
Connect the power cable to the printer.
Power on the printer and open the cover.
Power on the central unit and connecte the USB cable to the printer.
Closer the cover.
Procedure 2:
Uninstall the driver of the printer
Reinstall the driver.
Procedure 3:
Try another USB port.
Procedure 4:
The electronical car of the printer may be faulty.
Subscribe to:
Posts (Atom)