Showing posts with label print. Show all posts
Showing posts with label print. Show all posts
Tuesday, October 22, 2013
Print spooler service keeps stopping
Unassisted print spooler service not running error correcteing is near unlikely because it’s connected with Windows system and Windows registry transforms. Some errors in your registry are likely reasoned by a print spooler keeps stopping error. Print spooler service keeps stopping error and breakage can be a denouement of registry transgressions.
Print spooler service keeps stopping error is a wide spread matter and every consumer impacts it for this once. A precedence matter of print spooler service not running error fix up is a lot of possible failure causes. A likely print spooler keeps stopping error cause is malicious applications functioning.
ReadMore..
Print spooler service keeps stopping error is a wide spread matter and every consumer impacts it for this once. A precedence matter of print spooler service not running error fix up is a lot of possible failure causes. A likely print spooler keeps stopping error cause is malicious applications functioning.
Sunday, October 20, 2013
How to reset Brother DCP 195C printer clean unable 46 unable to print clean pad is full
clean unable 46
unable to print clean pad is full
Here is the proper reset code sequence to reset DCP printers without numeric keypad:
This instruction is also applicable to printer model: Brother DCP 110C, 115C, 120C, 130C, 135C, 145C, 150C, 165C, 185C
1. Press the Menu, then Mono Start key then press the UP arrow key 4 times to make the machine enter the maintenance mode and "ERROR 46" pops-up in the display.
2. Enter maintenance mode 80: Select 8 by pressing the UP/DOWN arrow key and push OK key and select 0 and push OK key
3. Now Press MONO arrow key several times until you see PURGE:XXXXX
4. Select 2 and push OK, Select 7 and push OK, 8 and push OK, select 3 and push OK and the purge counter is now reset to 00000.
5. Press STOP/EXIT key to go to root of maintenance mode
6. Enter code 99 to exit maintenance mode: Select 9 and push OK, Select 9 and push OK.
Tuesday, May 21, 2013
Fiery EB 135 print controller configuration page
To print a configuration page from a printer with the Fiery EB-135 print controller installed, go to the Fiery screen on the printers interface and follow the instructions below:
- Select Main Menu/Cancel in the center of the screen
- Select the right arrow button to the right of Print Pages
- Select the right arrow button to the right of Configuration
ReadMore..
- Select Main Menu/Cancel in the center of the screen
- Select the right arrow button to the right of Print Pages
- Select the right arrow button to the right of Configuration
Subscribe to:
Posts (Atom)