Printers Manuals

• Download Adjustment Program for Epson RX700 and extrac the adjustment program. Then goto extracded folder and the run by clicking AdjProg.exe. to use this software no need date setting must be alter in the PC.
  Download Adjustment Program Epson RX700 in 7z format (3,82 MB)
  Download Adjustment Program Epson RX700 in Zip format (4,37 MB)
• Click pasticular adjustment mode button
  
• Select port selection and destination and equal to the printer.
  
• Select Consumables maintenance counter. Then press “OK” or double-click to execute it.
  
• Click the Initialize button to clear the all of maintenance counter to “zero”. Once you press [Initialize] button, you can see its completion message, so that press OK. To see the current or initialized counter click Read button.
  

• Download and install SSCServe software then select printer model and equal to the printer and then close the setting.
  
• Open SSC menu by right clicking mouse on SSC icon in the systray, choose protection counter and the choose reset protection counter.
  

• Download Adjustment Software, for Epson CX3900. You can download the software at download page above: Download Epson Resetter
• Set date setting in Computer to 23 January 2007.
• Extrac and Run adjustment program by clicking file named “AdjProg.exe” then click accept.
• Click Particular adjustment mode, OK
• Select Waste ink pad counter and double?click to execute it
• Clear the printer counter by clicking “Initialization” button.
• Turn off the printer the turn on again, and the printer should be Ok

• Start with printer on. I assumed you have installed SSC software (also called SSC Service Utility) in your computer. You can download SSC software from this link: Download SSC Service Utility
• Run and install SSC software.
• Run setting in the printer model section and equalto the printer the close the setting.
• Right click mouse on ssc icon in the system tray, select “protection counter” then click “reset protection counter”, Ok.
• Turn off the printer the turn on again, and the printer should be Ok

• Download the adjustment program (see under)
• Extrak adjustment you have downloaded
• Go to The extrakded folder then click tricks-collections.bat file
• Now set the date setting in you PC to 11 April 2008,
• Run adjustment program by click AdjProg.exe file the click accept
• Click Particular adjustment mode then select destination and printer port then click OK
• Select Waste ink pad counter from the below window and double-click to execute it
• Click [Check] button to check current protection counter’s value.
• Then Click [Initialization] to reset the protection counter to the initial value. Thats all.
• After finishing, you can change the date to normal.

1. Double click AdjProg.exe.
2. Click “Accept” button.
3. Click "Select" button. and select your printer model then click "OK"
4. Click “Particular adjustment mode” button.
5. Select on “Waste ink pad counter” and click “OK” button.
6. Click on “Initialization” button and the program will reset the protection counter.
7. Turn off the printer as a program instructed then turn on again.
8. Click “Finish” button. and its done!

Warning: You might end up with ink leaking out of the printer if you dont either replace the waste ink pad or install external waste bin.