2013 | Printers Manuals

Monday, December 2, 2013

Pixma ip1000 waste ink counter reset

1 .- Disarmament printer (iP1000) to the last nut and electrical parts not put them in a bucket and water detergenete one day, the clean electrical parts with a brush and compressed air (only the panel and the part where they are I think this is the hoses counter sheets).

2 .- Assemble everything and ready, m Segia giving error that estava refill the tub.

3 .- I found this forum I found it excellently well, and found his valuable help, for hise ready to reset the manual steps and I think it worked, and then I saw that there is a program I use which is of the iP1500, has good This boy, when you give in MAIN section to reset the counter TITN, the program hangs and does not give more or give notice of anything only comes GeneralTol for T3164 Ver1.18 (Not Responding) and I close it and go but if I send a sheet to provide if I am out = that the ink is full depisito thing about this two questions:

1 .- reset the program is not compatible with XPSP2 Widnows?
2 .- The printer will want to go to give it away xD (just kidding ruled this question)

leei good step below to reset iP1000 infallible, as I did, and the power button flashes but not as before now turned on and off completely, I guess its a good sign, as it used to be a very dim flicker but Linux newbie , because the program is opened again to reset e = in the time I wrote this post sige locked the program, and now gave him close and not send errors.

and provide you with this:
1 .- disable Avast! antivirus
2 .- off anything that is USB connected to this pc estubiera

Sunday, December 1, 2013

Epson Stylus Photo TX650 Resetter

Epson Stylus Photo TX650 Resetter

Before using the Software Resetter Epson Stylus Photo TX650, make sure:

a. Epson Stylus Photo Printer Drivers TX650 is installed first, and make sure the printer is connect to the computer
b. Make sure you have the "Software Resetter Printer Epson Stylus Photo TX650"
c. Make sure that the damages requested in the printer reset counter (usually a red flame of the lamp on the printer all)
Here is a tutorial resetter Epson Stylus Photo TX650:
One. Prepare Adjustment Epson Stylus Photo Software TX650 on your computer

2. If the software is compressed, first extract the software resetter Epson Stylus Photo TX650
3. Turn on the Printer
4. Open the folder resetter Epson Stylus Photo TX650 Adjprog.exe you and run the file.
5. Click Particular adjustment mode menu entry to reset the counter printeradjustment Epson tx650
6. Find and click on Waste ink pad counter menu, then click OK
7. Put a Check on main pad counters, Platen pad counters, and counters of 80 culmu Pad. Then click on Check to see third-counter value at the time of blinking, and click OK to continue

Click initialization to change / reset the printer counter becomes zero, so the printer to be normal again. Then click OK to continue
8. Click Finish to end the process of resetting counters TX650 Epson Stylus Photo
9. Click Previous to return to main menu
10. Click Quit to exit the program counter reset TX650 Epson Stylus Photo
11. Waste ink counter reset TX650 Epson Stylus Photove done, turn off the printer for a while, and then restart the printer, and wait until the printer calibration is completed

CANON PIXMA XNU i255

CANON PIXMA XNU i255

Canons latest printer output is a series XNU i255. Desainya trendy and compact (width less than a computer keyboard) reminds the previous printer models, Canon XNU i320.

Material coated with titanium white and gray accents line, looks sturdy and elegant appearance. In addition, bubble jet printers that offer competitive prices are very efficient because it can be placed in the narrow room.

Canon XNU i255 in its class to offer the highest resolution of 4800 x 1200 dpi with 5 pl ink droplets that have the ability to print the image detail is perfect. Printing process was very fast. Prints can be enjoyed only a short time, ie 12 ppm for monochrome and 9 ppm for color.

While for printing an image size of 8 x 10, XNU i255 took only 100 seconds. This capability is possible thanks to technology developed MicroFine droplet to produce a perfect image printing, precision and a solid color.

XNU i255 excellence is not limited to full color documents, but monochrome documents. With a grain of ink is very smooth and solid as well as the ability of the pigment black ink, will be produced sharp text in monochrome document.

Photo print quality is also no doubt youll get the prints with better color contrast is perfect. Easy-PhotoPrint Technology Exif Print support will provide professional photo prints. Just pick the image, the paper type and size, then print directly. Meanwhile, Vivid technology maximizes color photos so photos look more vivid.

This printer is able to maximize the ability to improve the color reproduction of colors including green and bright blue so the color photographs will be as beautiful as the original. Natural image is produced with the aid of Photo Noise Reduction mode, which will eliminate the noise so that image is more smooth and clear.
One thing that makes XNU i255 is the existence of the special features of Easy WebPrint. With this feature, print web pages easier. No need to lose some important information that you want to print from these web pages.

It feels, words are not enough describe the benefits of this printer, its better if you prove it directly. You will never miscast, because XNU i255 suitable for users who use Windows or Macintosh operating systems.

Saturday, November 30, 2013

HP Laserjet 9000 9050 Installing the fuser

Activity the machine off and unplug the nation conductor. The fuser might be hot if you bonk been using the printer. As a device step inactivity 30 minutes for the fuser to chilly before proceedings.

To attain the fuser, undecided the unexpended back entry.
If a duplexer is installed (shown beneath), shift it from the backwards of the printer. To disappear the duplexer, mold kill on the unripened tumbler and injure the duplexer out of the machine.

Succeeding, rotate the two nonindulgent levers at the top of both sides of the fuser towards the refer of the organisation.

With the dark levers "unlocked," raising up slightly on the dejected fingerbreadth handle (shown below) and indorse the fuser gone from the printer until the fuser catches and stops.

When the fuser catches and stops, flex the fuser towards you and conveyance it up and absent from the printer using the organisation strap hold. The fuser is misleadingly laboured, dont quit it.

Now pose the new fuser; slideway it corroborate in area and when it is steady, confine the bluish levers at the top of the fuser backwards in base. Reinstall the duplexer if it was installed.

Friday, November 29, 2013

INSTRUCTIONS FOR REFILL BROTHER INKJET

1. Cover the outlet hole with a small piece of tape. If this is not done the ink may run out of the outlet hole when the hole is drilled in the top of the cartridge.
2. Peel back label as shown in photo.
3. Using the thumb drill provided, drill into the recessed area under the label until drill fully penetrates cartridge.
4. Fill syringe with 10 ml. of black ink. 5-8 cc of color ink for the color cartridge.
5. Very slowly inject the ink into the sponge until the cartridge is full.
6. Seal the hole made in the top label with tape. Note: If the holes are not sealed properly the cartridge will leak.
7. Unused ink may be returned to the bottle. Clean the syringe with water and dry for future use, or use with a different colour ink.
8. Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions.
For best results, leave cartridge in printer for 8 hours after refilling so the ink can saturate the entire sponge. (Allows ink to flow to the print head).
NOTE: If cartridge is refilled before it is completely empty this time is greatly reduced.

BROTHER LC02, LC04, LC21, LC31, LC800
Brother ink refill instructions

1.Remove cartridge and put a piece of tape over the outlet port to prevent ink drips during the filling process.
2. Pry off the black or color lid (cover) from the top of the cartridge by using a small flat blade screwdriver.
3. Remove the larger silver seal using a pocket knife or finger nail.
4. Enlarge the Filling hole in the top of the cartridge(s) using the thumb drill provided.
5. Hold the cartridge so that the Vent hole (at the front of the cartridge) is slightly higher than the Filling hole.
6. Insert the syringe through the Filling hole, and push all the way into the cartridge. The cartridge contains a sponge and a slight resistance may be felt.
7. Very S-l-o-w-l-y inject up to 7 ml. of ink until the reservoir under the Vent hole fills from the bottom to the top.
8.Reseal both holes (Filling and Vent) with tape.
9. Replace the cover by snapping the cover back onto the cartridge.
10. Remove the tape from the outlet port when ready to reuse the cartridge.
11. Unused ink may be returned to the bottle. Rinse the syringe with warm water and dry for future use.
12. Replace the cartridge(s) and run 1 - 3 cleaning cycles as per printer instructions.
Note on LC04 Black Only:
You can get more copies if you cover the side of the cartridge that sits against the printer with a piece of black electrical tape. This has two benefits. Youll get more copies per refill and it is easier to refill because you dont have to get the reservoir under the vent hole full. The one drawback is that you have very little warning of low ink. It will print lite for a couple of pages and then nothing.

BROTHER LC41

There are two methods you can use to refill this cartridge.
Use the one that suits you the best.
Method One
1) Put the needle onto the syringe and suck up 25ml of black or 20ml of color ink.
2) Remove the needle from the syringe.
3) Put the cartridge on a flat, ink proof surface, with the bottom facing up.
4) Push the tip of the syringe into the "ink exit hole" and tilt the syringe to the side. Remember, you should not have the needle on the syringe.

Note: Do not bump or press the "pressure release button".
5) Pull back on the syringe plunger until 3-4 ml of air from the cartridge bubbles up through the ink. A slight vacuum will form in the cartridge. Then push on the syringe plunger slightly to inject 3-4 ml of ink.
6) Repeat this step 5-8 times to pump the air out of the cartridge and replace it with ink

7) When the process is complete, the syringe will be filled with air. Pull back on the syringe plunger one more time to pull a few extra ml of air out of the cartridge and then pull the syringe out of the "ink exit hole".
8.Replace the cartridge(s) and run 1 - 3 cleaning cycles as per printer instructions.

Method Two
1. Put the cartridge on a newspaper or some paper towels in an area where you can tolerate a spill.
2. Turn the cartridge on its side and drill a hole 1/4 inch down from the black cap into the clear part of the plastic (see Photo)
3. Fill the syringe with 20 ml. of ink.

4. Insert the syringe through the drilled hole, If the needle hits the inner part of the cap then aim the needle in a downward position as seen in the photo.
5. Slowly inject ink until you see the ink come up to just below the drilled hole.

6. Cut a small square of aluminum tape and reseal the drilled hole.
7. Unused ink may be returned to the bottle. Rinse the syringe with warm water and dry for future use.
9.Replace the cartridge(s) and run 1 - 3 cleaning cycles as per printer instructions.

) Cut label at joint between top and bottom halves of the cartridge case.

2) Flip open the cartridge casing (shell).
3) Put the sharp filling needle onto the syringe and fill the syringe with ink.
4) Pierce the top part of the cartridge with the needle and S-l-o-w-l-y inject 15cc of ink into the cartridge bag.
5) Put a piece of aluminum tape over the filling hole.
9) Place the casing (shell) back together and use a piece of tape to hold the two sides of the casing (shell) together.
Note: Do not bump or press the "pressure release button".
10) Replace the cartridge(s) and run 1 - 3 cleaning cycles as per printer instructions.

BROTHER LC61 and LC65

Refilling the original Brother LC-61 cartridge is not practical because of the design.
Listed here are the refill instructions for the Printer Filling Station after market LC61 cartridges.

1) Remove the cartridge when it is running low or out of ink.
2) Drill a small hole in the top of the cartridge.
3) Fill your syringe full of the proper ink. The cartridge will take approximately 12ml of ink.
4) Put the syringe needle into the drilled hole and Slowly inject ink until the cartridge is full again.
5) After the cartridge is full of ink, you can seal the drilled hole with a set screw or just leave it open, it will not make any difference in the print. If you do use the set screw be sure to screw it down flush with the top of the cartridge. There is a piece that will have to slide over the set screw when it is placed into the printer.
6) Replace the cartridge(s) and run 1 - 3 cleaning cycles as per printer instructions.

Thursday, November 28, 2013

Resetter Epson Stylus 1390

Epson Stylus 1390 is a A3 sized printer, a difference that offers six individual ink cartridges. Thus if there is damage, we only replace defective cartridges alone, for example, blue, just have to replace ink cartridge cyan - rather than buying the combined cartridge cyan color when exhausted.

Ink cartridge uses Epsons DURABrite Ultra pigment inks that are not waterproof or fade and long lasting. For software also comes with Epson Easy Photo Print, and Epson Creativity Suite, which has the software plug-ins to handle downloading images from digital cameras. The advantages of the Epson Stylus 1390 printer are:

Reduce Costs with INKdividual Cartridges
- Cost-efficient with INKdividual Cartridges
- Optimise ink usage and reduce costs
- Living to replace one if the color ink cartridges run out
- Eliminate the wastage of Throwing away with the rest of the other color ink cartridges

The fastest printer to Stay One Step ahead
- Prints up to 15ppm for color and monochrome
- 5 small dots of various sizes with Advanced VSDT
- Portrays the most delicate color transitions
- Optimized to accelerate performance

Using the Print Size Matters
- Eye prints up to A3 + size BorderFree
- Beautiful for the design, promotion, and exhibition-quality photographs
- Affordable large print flexibility for small businesses

Visual Expression
- New photos are specifically formulated for the finest visual Ink print
- Reach broader, color and glossy finish
- Colour of life for black and white photographs and portraits, artwork, and cool
- Maintain and keep photo prints for long term
- Held up to 200 years (in the photo album storage)

Quality Makes the Difference
- Images are portrayed superbly up to 5760x1440 dpi
- With technology, Advanced Micro Piezo print head VSDT
- Minimum 1.5pl droplets of ink to the results of a very soft

Support for Adobe RGB Photographer
- Innovative Adobe RGB color mode solution
- Expression of bright colors
- Accurately describe the wider overall than the pictures taken on digital cameras
- Various color output mode
- It is crucial for graphics professionals, business users, or a photo enthusiast

Improved to PhotoEnhance Flawless Photos
- Print perfect photos without the hassle
- Technology in New improved EPSON PhotoEnhance Technology
- Intelligent software analysis to determine optimal image settings
- Automatic adjustment of color, skin tone and background

Use without difficulty with the EPSON Creativity Suite
- Neat manage all your digital images
- Print Print beautiful, high quality photos easily with Photo Print Easily
- Supports many RAW image formats for the professional needs

How to Reset Epson Stylus 660

How to Reset Epson Stylus 660

This procedure is to reset the Epson Stylus 660 printer when are the lights will blink and will not let you print.

Para realizar el reset lo que tiens que hacer es lo siguiente: To perform the reset tiens what to do is the following:

Hay que presionar y mantener apretado el boton de LOAD/EJECT (tomar hoja) y el de Cleaning (limpieza) . We must press and hold the button LOAD / EJECT (take up) and the Cleaning (cleaning).

Mientras mantienes apretados esos botones , tienes que presionar el boton de POWER (encendido) y tenerlo apretado hasta que las luces (ink out – tinta vacia y paper out- falta papel) empiezan a titilar o parpadear. While holding these buttons, you must press the power button (on) and keep it tight until the lights (ink out - empty ink and paper out-out of paper) start to flash or flicker.

Cuadno suceda esto suelta todos los botones. When it has to happen this release all buttons.

Cuando pasen 3 o 4 segundos apreta y mantenlo apretado el boton de CLEANING (limpieza) hasta que las luces que titilaban dejen de hacerlo. When you spend three or four seconds click and hold down the button CLEANING (cleaning) until the lights flickered stop.

YA ESTA!!! NOW THIS! ya quedo lista para usarla!! and am ready to use!

Seria conveniente que cada vez que se haga este procedimiento hacer una limpieza a la esponja interna de la impresora, por que alli deja depositado todo el exceso de tinta de la impresora y podria derramarse. It would be desirable that each time you do this procedure done to clean the sponge inside the printer, because there left on deposit all excess ink from the printer and may spill. Esto no es 100 % necesario pero seria muy bueno que lo hagas. This is not 100% necessary but it would be very good to do so.

Wednesday, November 27, 2013

wasted ink pad tinta lleno

Si tiene el contador de tinta lleno o el wasted ink pad
Lo primero que tienes que hacer es desenchufar el cable de corriente y el cable USB
Abres la tapa de la impresora y mantienes apretado el boton de encender en ese momento enchufas el cable de la corriente (recuerda mantener apretado el boton)

Cierra la tapa de la impresora y recien ahroa suelta el boton de encender.
Esta listo! ahora puedes usar la imrpesora sin problema
Hay un soft que puedes utlizar para hacer este mismo procedimiento y que quede definitivo.

Modelo y tipo de cartucho que utiliza la pixma IP1500
Negro PG-37
NEgro PG-40
Negro Alta capacidad PG-40

Color CL-38
Color CL-31
Color alta capacidad CL-41

Tuesday, November 26, 2013

How To fix Error 60 02 on HP Laserjet 4250 series

How To fix Error 60.02 on HP Laserjet 4250 series

It appears that the spring which holds the lifter motor upright was designed without enough tension on it.

If the spring is removed and the motor assembly is allowed to fall to the right when the paper tray is inserted the motor never engages the tray and an error 60.02 appears.

However if the motor assembly is held upright while the tray is inserted the error message never appears as the motor always engages.

Monday, November 25, 2013

How To fix Canon LBP2900 Error Code E100 0000

Canon LBP2900 E#100, ERR 100 or E100-0000: thats a laser scanner unit error.

Procedure 1:

Turn off the printer, wait 10 minutes, and then turn it on again.

Procedure 2:

Flip open the top of the printer.

Look for a small shutter that holds the laser: carefully force this open with your hands and force the laser out into the center of the tracking cradle.

After you move the laser, unplug the printer for a few minutes.

Plug the printer back in.

Reset counter Epson Stylus Photo RX700 Using Software Resetter

The tutorial to Reset counter for Epson Stylus Photo RX700 using software resetter. There are two software resetter can be used to reset this printer model that is “Adjustment Program Epson Stylus Photo RX700” and SSC Service Utility ver 4.30. But I recommend to use SSC software to reset the printer Epson RX700 because this software is free.
Epson Stylus Photo RX700 all-in-one photo center printer and its designed to take your photos further with professional level performance. This Epson printer model compatible with Windows and Macintosh operating system.
To reset Epson RX700 using the both software (adjustment program and Epson SSC Service utility) you can follow the following steps:
Reset Using adjustment program rx700

Download Adjustment Program for Epson RX700 and extrac the adjustment program. Then goto extracded folder and the run by clicking AdjProg.exe. to use this software no need date setting must be alter in the PC.
Download Adjustment Program Epson RX700 in 7z format (3,82 MB)
Download Adjustment Program Epson RX700 in Zip format (4,37 MB)
Click pasticular adjustment mode button
Select port selection and destination and equal to the printer.
Select Consumables maintenance counter. Then press “OK” or double-click to execute it.
Click the Initialize button to clear the all of maintenance counter to “zero”. Once you press [Initialize] button, you can see its completion message, so that press OK. To see the current or initialized counter click Read button.

Reset Using SSCServe 4.30

Download and install SSCServe software then select printer model and equal to the printer and then close the setting.
Open SSC menu by right clicking mouse on SSC icon in the systray, choose protection counter and the choose reset protection counter.

I hope this reset tutorial can solve your epson RX700 problem. Happy resetting

Sunday, November 24, 2013

How To fix HP Laserjet 49 errors

How To fix HP Laserjet 49 errors

The HP laserjet 49 errors are a firmware error, it might be caused by the firmware itself, or by the failure of a printer module.

How to isolate the cause:

Verify that the problem is not being caused by a specific job, this error can be caused by bad information being sent to the printer.

Power off and remove any installed EIO devices, (JetDirect Cards, Hard Drives), power on and test.

Cold Reset the printer:

Power off, remove any optional memory, power on and retest.

Power off and reseat any memory and firmware modules on the formatter board, power on and test.

Power off, reseat the formatter board, power on and test.

Check firmware version:

On newer machines with flashable firmware upgrade to the latest version. If you are running the latest version reload it, this might fix corrupted firmware. (Some printers have flashable firmware, others use a Firmware DIMM which must be replaced to upgrade.)

If you havent found the cause yet, it could be:

The firmware module if its a DIMM as opposed to being part of the formatter.

The memory if installed, some printers have to have at least one memory module installed to run, and it must have enough capacity to function, in some cases installing a module that does not meet the minimum requirements of the machine will cause a 49 error

Saturday, November 23, 2013

Xilisoft Photo to Flash 1 0 1 Build 20120227

Xilisoft Photo to Flash 1.0.1 Build 20120227

Xilisoft Photo to Flash 1.0.1 Build 20120227

Xilisoft Photo to Flash 1.0.1 Build 20120227 | 29.1 Mb

Xilisoft Photo to Flash is the best flash slideshow maker which can create dynamic flash slideshows from a dozen of photos in formats of jpg, jpeg, png, gif, bmp, tiff, xbm, xpm to SWF, XML and HTML output formats.To create personalized flash, you are enabled to add background music, make a choice from many given flash templates, adjust the orientation and display sequence of the imported photos and etc. With Xilisoft Photo to Flash, your photo collections can be turned to a dynamic and vivid flash show.

Create Flash from Multiple Image Formats
Create flash from multiple image formats, including jpg, jpeg, png, gif, bmp, tiff, xbm and xpm.

Support Adding Various Audios as Background Music
Xilisoft Photo to Flash enables you to add background music from various audio formats, like aac, aif, aiff, ac3, ape, au, flac, mpa, mp2, mp3, ogg, ra, wav, wma, m4a to enrich the output effect of flash.

Multiple Templates are Given
Multiple templates are given to simplify the design of flash, 3D templates are provided as well.

Edit on Imported Images
Adjust the orientation of the imported photo collections; fine-tune the display sequence of images by drag-and-drop.

Personalize the Background Music
Personalize the background music by setting the play order of background music, clip background music to retain the favorite segment, add fade-in and fade-out effects, you can also set the loop mode to play background music automatically.

Export Images to SWF or HTML Files
Generate SWF file or publish as HTML flash gallery directly.

Support XML Output Format
support XML as output format and enable you to update images in the flash gallery without the program.

Multilingual Interface
English, German, Spanish, French, Italian, Japanese, Simplified and Traditional Chinese interface languages are optional.

DOWNLOAD LINK:JUMBOFILES

Reset the ink level for Cartridges HP 21 HP 27 HP 818 HP 802 HP 56 HP 58 HP 22 HP28 and HP 57

Reset the ink level for Cartridges HP 21, HP 27,HP 818,HP 802, HP 56, HP 58, HP 22, HP28 and HP 57

The Steps to Reset Ink level Printer cartridges HP 21, HP 27,HP 818,HP 802, HP 56, HP 58, HP 22, HP28 and HP 57

Step1:

Turn your computer OFF and then remove cartridge from the printer.

Step2:

Turn the printer off

Step3:

Place a piece of tape over the top left contact of the circuit as shown in BLUE on the picture.

Step4:

Turn on the printer. Printer will automatically print test page. (Note:if printer does not print a test page but goes through a head movement printer initialising process continue following steps when initialising process ends.

Step5:

Remove the cartridge from printer.

Step6:

Place a piece of tape over top right contact of the circuit as shown in RED on the picture.

Step7:

Replace cartridge to printer. Printer will go through a series of tests. initialising process.

Step8:

Remove cartridge from the printer.

Step9:

Place a piece of tape over the two contacts on the right side of the cartridge circuit as shown in GREEN on the picture.

Step10:

Replace cartridge to printer. Printer will run additional tests and be quite audible.(Ink levels will display “printer busy message” at this point)

Step11:

Remove cartridge from printer and remove all tape from the cartridge.

Step12:

Reinstall cartridge. (Ink levels will display “printer busy message” at this point)

Step13:

Turn printer off. Wait for 60 seconds and turn the printer back on. Ink level should now read full.

Refilling Instruction:

When You Refill the cartridge maintain the correct amount of liquid Ink So that the cartridge dont leaks.

For BLACK Printer cartridges HP 21, HP 27, HP 56, HP 818, HP 802 - 5ml

For tricolor Printer cartridges HP 22, HP 28, HP 58, HP 818, HP 802 - 2ml each

Note:Do Not overload ink it will cause leak, consider low quantity ink refill for each refilling process.

Use not more then 5ml syringe with needle for best refills.

Friday, November 22, 2013

Reset printer spooler windows 7

1. Open Services, and stop the Print Spooler service.
2. In Windows Explorer, navigate to the folder below, and open the PRINTERS.
3. Click on Continue and Yes (if prompted by UAC) to approve opening the PRINTERS folder.
4. Delete all files in the PRINTERS folder until it is empty, then close Windows Explorer.
5. Open Services, and start the Print Spooler service.

Thursday, November 21, 2013

Free Download Canon Series printer Service Manual

Free Download Canon Series printer Service Manual here.
Canon BJC-1000 2.5 Mb-
Canon BJC-2000 1.5 Mb-
Canon BJC-3000 3.0 Mb-
Canon BJC-4400 1.3 Mb-
Canon BJC-50 7.8 Mb-
Canon BJC-5000 3.0 Mb-
Canon BJC-6000 6.2 Mb-
Canon BJC-6200 2.2 Mb-
Canon BJC-6500 3.8 Mb-

Canon BJC-7100 4.7 Mb
Canon BJC-7100 4.7 Mb-
Canon BJC-8200 3.1 Mb-
Canon BJC-8500 5.8 Mb
Canon CanoScan D1230 1.1 Mb-
Canon CanoScan D660U 947.7 Kb-
Canon CanoScan N650U 1.3 Mb-
Canon CLC 10 7.5 Mb-
Canon CLC 1120 10.4 Mb
Canon CLC 1120 2.4 Mb-
Canon CLC 1130 10.4 Mb
Canon CLC 1130 2.4 Mb-
Canon CLC 1150 10.4 Mb
Canon CLC 1150 2.4 Mb-
Canon CLC 5000 7.6 Mb
Canon FAU-S11 384.3 Kb-
Canon Fax Basic 2000 3.8 Mb-
Canon Fax-L1000 6.3 Mb
Canon FB1210U 1020.3 Kb-
Canon i320 1.6 Mb-
Canon i450 448.6 Kb
Canon i550 1.4 Mb-
Canon i850 1.4 Mb-
Canon i950 1.4 Mb-
Canon iR1018 12.8 Mb
Canon iR1019 12.8 Mb
Canon iR1022 12.8 Mb
Canon iR1023 12.8 Mb
Canon iR2016 18.2 Mb
Canon iR2020 18.2 Mb
Canon LaserBase MF3110 5.2 Mb
Canon LBP-1000 2.6 Mb
Canon LBP-1000 2.6 Mb-
Canon LBP-1120 8.8 Mb-
Canon LBP-1210 10.9 Mb
Canon LBP-1760 6.9 Mb
Canon LBP-1760 6.9 Mb-
Canon LBP-2000 2.3 Mb
Canon LBP-2000 2.3 Mb-
Canon LBP-2460 10.0 Mb
Canon LBP-3200 2.8 Mb
Canon LBP-3260 4.5 Mb-
Canon LBP-800 3.1 Mb-
Canon MF3110 5.2 Mb
Canon mp150 6.3 Mb
Canon mp360 3.2 Mb
Canon mp370 3.2 Mb
Canon mp390 3.2 Mb
Canon mp500 1.6 Mb
Canon mp760 822.1 Kb
Canon mp800 3.3 Mb
Canon NP 1550 4.1 Mb-
Canon NP 6012 4.4 Mb-
Canon NP6045 9.1 Mb
Canon NP6085 6.2 Mb
Canon NP6317 11.4 Mb
Canon NP6320 7.6 Mb
Canon NP6330 3.5 Mb
Canon NP6512 6.1 Mb
Canon NP6612 6.1 Mb
Canon NP6621 3.8 Mb
Canon NP7120 6.1 Mb
Canon NP7130 6.1 Mb
Canon NP7130F 6.1 Mb
Canon NP7160 2.4 Mb
Canon NP7161 2.4 Mb
Canon PC800 5.1 Mb-
Canon PC900 5.1 Mb-
Canon PIXIMA iP1500 764.2 Kb
Canon PIXIMA iP1600 263.6 Kb
Canon PIXIMA iP3000 596.5 Kb
Canon PIXIMA iP4200 2.9 Mb
Canon PIXIMA iP5200 2.6 Mb
Canon PIXIMA iP5200R 2.6 Mb
Canon PIXIMA iP6000D 4.6 Mb
Canon PIXIMA iP6210D 410.9 Kb
Canon PIXIMA iP6600D 2.7 Mb
Canon PIXIMA iP8500 1.1 Mb
Canon PIXIMA ix4000 3.9 Mb
Canon PIXIMA ix5000 3.9 Mb
Canon S 600 4.7 Mb-
Canon S6300 1.9 Mb
Canon Scan FB330 1.8 Mb
Canon Scan FB630 1.8 Mb
Canon SmartBase mpc400f, 600 3.5 Mb

Wednesday, November 20, 2013

How to fix USB001 Operator error on hp epson canon brother printers

How to fix USB001 Operator error on hp printers

Solutions for "USB001 Operator error":

Procedure 1:
Disconnect the USB cable and the power cable from the printer.
Power off the printer and the central unit.
Wait a minute.

Connect the power cable to the printer.
Power on the printer and open the cover.
Power on the central unit and connecte the USB cable to the printer.
Closer the cover.

Procedure 2:
Uninstall the driver of the printer
Reinstall the driver.

Procedure 3:
Try another USB port.

Procedure 4:
The electronical car of the printer may be faulty.

Subscribe to: Comments (Atom)